Broadband Network Connections - Panasonic SC-BTT370 Easy Setting Manual

3
Connect the cables
Connect the cables by colour or by the numbers indicated in the illustration
to the appropriate terminals on the rear panel of the unit.
PURPLE GREEN RED WHITE GREY
   
6 5 2
3 3 R 3
Ω Ω
CENTER FRONT
SUBWOOFER
Main unit
HDMI cable (not supplied)
(Recommended for highest quality picture)
HDMI
(ARC)
HDMI
OPTICAL
OUT
TV
VIDEO IN
L
AUDIO OUT
R
4
Turn on the main unit
1
Connect the AC mains lead
Connect the AC mains lead to the
main unit before connecting to the
household mains socket.
Main unit
AC mains lead (supplied)
To a household mains socket
It is possible to play back 3D videos and 3D still pictures by connecting this unit with a 3D compatible TV.
For detailed information, refer to the operating instructions.
BLUE
FM indoor antenna
(supplied)
 
1 4 3
L R 3 L
Ω Ω
SURROUND
If the HDMI terminal is labeled "HDMI (ARC)", you can enjoy TV sound and
pictures with a single HDMI cable.
If the HDMI terminal is not labeled "HDMI (ARC)", an "Audio cable"
or "Optical digital audio cable" is required to listen to sound from the TV.
Optical digital audio cable (not supplied)
Video cable* 1 (supplied only for Australia and New Zealand.)
* Make sure that the video cable connection is made
1
to view photos/videos from the iPod/iPhone.
Audio cable (not supplied)
2
Turn on the TV
Turn on your TV and select the appropriate video input mode
(e.g., VIDEO 1, AV 1, HDMI, etc.) to suit the connections to this
unit.
Adhesive tape
FM ANT
AUX
75
Ω
Audio connection
For best quality audio, use the HDMI
cable (with an ARC compatible TV)
or an optical digital audio cable.
If your TV does not support the
above, use the audio cable.
3
Turn on the main unit
Press [ ] to
turn on the
main unit.
Installing batteries in
the remote control
R6/LR6, AA
Other connection

Broadband Network Connections

By connecting this unit to the network, you can optimise the
internet features of this unit.
• Use category 5 or above straight LAN cables (STP)
when connecting to peripheral devices.
• When using the wireless LAN function, the LAN cable that
connected to the main unit is not necessary.
LAN
Main unit
LAN cable
(not supplied)
Broadband router, etc.
Internet
4
The Easy setup starts
The on screen display will guide you through the steps.
Easy setup
Would you like to start easy setup?
Yes No
OK
RETURN
Press [, ] to select [Yes] and press [OK].