Washing Procedure; To Wash; Spin Dry - Samsung WT80J8 Owner's Instructions Manual

Top-loading washer
Table of Contents

Advertisement

TO WASH ...................................................................................................................................

1. Before starting washing, check the following;
- Connect the water supply hose and open the
water tap.
- Connect the power cord to the power supply
outlet.
- Lay the drain hose(A) down toward a sinkhole.
- Place the drain hose(A) in sink or bath about
70~80cm above the ground.
2. Set the WASH SELECTOR
KNOB to the desired mode.
3. Set the CYCLE SELECTOR KNOB to 'WASH . RINSE'.
(In case no drain pump.) ('WASH' In case drain pump.)
(WITHOUT PUMP)

SPIN DRY ...................................................................................................................................

1. Transfer the clothes into the spin basket
and arrange the clothes evenly.
2. Be sure to attach the safety cover and close the
inner lid.

WASHING PROCEDURE

4. Set the WATER SELECTOR
KNOB to WASH .
5. Load laundry in the wash
tub.
(WITHOUT PUMP)
6. Fill water in the wash tub
(WITH PUMP)
7. Set the WASH TIME 1-15
minutes.
8. After washing,set the
CYCLE SELECTOR KNOB to
'DRAIN' for drain.
(WITH PUMP)
3. Close the spin dryer lid.
4. Set the AIR TURBO SPIN TIMER 1-10
minutes.
5. Incomplete spining.(Severe vibration or
unbalance) See "When you load ..."on
page 6.
4
and add the detergent.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents