Function B Memory Pads - Panasonic NE-9051 Operating Instructions Manual

To program function B memory pads.
Programs B1 - B7 are programmable.
Example: To program B1 memory pad on medium power for 10 minutes.
PAD
1
Close the door.
2
Press the P Pad.
P
P will blink in the display. The words ʻSELECT PROGRAM NUMBERʼ will scroll in the display.
3
Press B1 memory pad.
A
1
B
The words ʻSELECT MICRO POWERʼ will appear in the display.
4
Select desired Power level.
To select medium power: Press Power level selector pad 3 times. The words ʻSET TIMEʼ will
Micro Power
appear in the display.
5
10 1
min min
Set the desired time using the time pads. To set at 10 minutes: Press 10 min pad once.
The words ʻPRESS PROGRAMʼ will appear in the display.
10 1
sec sec
6
Confirm the program by pressing the P pad.
P
P will blink in the display. The words ʻPROGRAM SETʼ will appear in the display.
N.B. 1. You can program 2 or 3 stages on the Function B pads. Repeat stages 4 and 5 before pressing the P pad.
2. The function B programs will be stored as long as the oven is plugged in and electricity is supplied.
To operate a function B program.
Example: To operate program B1.
PAD
1
Open the door and put the food in the oven.
2
Press the B1 Memory pad.
A
1
B
Note: 1 press will select program A1. 2 presses will select program B1.
3
Press Start pad.
The oven lamp will turn on and heating will start. The heating time will count down.
• When all time expires, beep tone will sound and heating will stop. The oven lamp will turn off. One minute later, cooling fan will stop.
• Open the door and take the food out. The oven lamp will turn on.
• Close the door. The oven lamp will turn off.
Repeat Feature
• You can repeat the last selected function B program by pressing the Start pad, if the oven is used within 1 minute.
• The Repeat Feature will be cancelled after 1 minute of non-use, or by pressing Stop/Cancel pad once.
How to Operate
INSTRUCTION
INSTRUCTION
-
12-
DIGITAL DISPLAY WINDOW
P
B1
MEDIUM
10:00
P
DIGITAL DISPLAY WINDOW
B1
10:00