Getting Started; Unpacking Your Memoryframe; Registration & Your Product Serial Number - Pacific Digital MemoryFrame User Manual

4.

Getting Started

The following sections provide step-by-step instructions on setting
up your MemoryFrame for the first time.
4.1

Unpacking your MemoryFrame™

In the retail box, the MemoryFrame unit is wrapped in a cardboard
shock-absorbent holder. Do NOT RIP the "shrink-wrap" portion
when removing the unit. Instead, remove the entire cardboard
shock-absorbent holder from the box, and unfold the cardboard so
that it lies flat. After unfolding the cardboard, you can gently slide
the MemoryFrame from out of the "shrink-wrap" material. Next
refold the cardboard shock-absorbent holder and place it back in the
retail box. Save the box so you can pack or store the unit in the
future.
The MemoryFrame MF-570 retail pack includes:
MemoryFrame™ Electronic USB Digital Picture Frame
Wood 5x7 decorative frame (may be already attached to unit)
External power supply with cable
USB Cable (2 meters)
Digital PixMaster™ PC compatible photo slideshow software
and USB Drivers on CD-ROM
This Users Manual
Mail-in registration/warranty card (inserted into manual)
If something is missing from the above list, contact customer service
at the following phone number
North America: 888-999-0732 or 949-252-1111
Europe: +353-61-702029
4.2 Registration & Your Product Serial Number
Please record the model and serial number from the bar coded label
located on the rear of the MemoryFrame to keep for reference. The
serial number is required for Technical Support and Product
Registration. See Figure 2 for location of model and serial number.
Copyright© 2002-2003 Pacific Digital Corporation
Page 6