Removing The Protective Plastic Film From The Lcd - Pacific Digital MemoryFrame User Manual

Model #
Serial #
Figure 2 – Product Serial Number Label
In order to receive your one year of free technical support, you must
register online at:
fill-out and mail the included mail-in registration card.
4.3

Removing the Protective Plastic Film from the LCD

The MemoryFrame ships with a protective plastic film on its LCD
screen. The purpose of this protective plastic film is to prevent the
LCD screen from being scratched or damaged during manufacturing
and packaging. You can choose whether to remove the protective
plastic film or to keep it on. Please note, however, that the clarity of
the images will appear brighter and clearer after removing the
protective plastic film from the LCD screen. To remove the
protective plastic film, look closely at the four corners of the
MemoryFrame LCD screen. You will see that one of the four
corners is lifted slightly. Carefully lift that corner and peel the
protective plastic film away from the MemoryFrame. Use the
Contrast Up/Down buttons to achieve your desired level of contrast.
Note: You may choose to leave the protective plastic film on the
LCD screen to keep it protected.
Copyright© 2002-2003 Pacific Digital Corporation
Model U-30140
http://www.PacificDigital.com or alternatively
Page 7