Samsung Refrigerator User Manual page 18

setting up your refrigerator
REASSEMBLING THE FRIDGE DOOR
1. Insert and tighten the
screw into the left and
right middle hinges with a
philips screwdriver(+).
4. Place the hole in the
bottom of the left door
over the middle hinge.
7. Insert and tighten the
ground screw into the left
and right upper hinges with
a philips screwdriver(+).
18_ setting up
2. Insert and tighten the 2 hex
head bolts into the left and
right middle hinges with an
allen wrench(Ø5mm).
5. Insert the left upper hinge
shaft into the hole on the
corner of the fridge door.
8. Connect the electronic
wire on the top of the
refrigerator.
3. Replace the middle hinge
cap.
6. Insert the upper hinges
into the holes at the top of
the door.
Insert and tighten the 3
hex head bolts into the left
and right upper hinges with
a socket wrench(10mm).
9. Position the top table in
place. Insert and tighten
the 3 screws into the
top table with a philips
screwdriver(+).