Setting Up Your Refrigerator; Getting Ready To Install The Refrigerator - Samsung Refrigerator User Manual

setting up your refrigerator

GETTING READY TO INSTALL THE REFRIGERATOR

Congratulations on your purchase of this Samsung Refrigerator. We hope you enjoy the state-of-art features
and efficiencies that this new appliance offers.
Selecting the best location for the Refrigerator
• A location with easy access to the water supply.
• A location without direct exposure to sunlight.
• A location with level (or nearly level) flooring.
• A location with enough space for the Refrigerator doors to
open easily.
• Allow sufficient space to the right, left, back and top for air
circulation. If the Refrigerator does not have enough space,
the internal cooling system may not work properly.
• Please ensure that appliance can be moved freely in the event of maintenance & service.
First thing! Make sure that you can easily move your Refrigerator to its final location by measuring doorways
(both width and height), thresholds, ceilings, stairways, etc.
RF62* : 1172mm
RF67* : 1222mm
• Allow clearance to the right, left, back and top when installing. This will help reduce power
consumption and keep your energy bills lower.
• If you install the Refrigerator where is below 10ºC, it may not function in optimum level.
• Do not locate the refrigerator where the wet condition.
When moving your refrigerator
To prevent floor damage be sure the front leveling
legs are in the up position(above the floor).
CAUTION
Refer to 'Adjusting the doors' in the manual
(on page 23)
FLOORING
For proper installation, this refrigerator must be placed on a
level surface of hard material that is the same height as the
rest of the flooring. This surface should be strong enough to
support a fully loaded refrigerator, or approximately 106kg.
To protect the finish of the flooring, cut a large section of the
cardboard carton and place under the refrigerator where you
are working. When moving the refrigerator, be sure to pull it
straight out and return it to position by pushing it straight in.
10_ setting up
817mm
1492mm
Drawer-Type
817mm
665mm
RF62* : 1125mm
RF67* : 1175mm
1492mm
Swing-Type
Flat-blade
screwdriver(-)
150mm 150mm
100mm
100mm 100mm
817mm
Control Lever
100mm
RF62*:1455mm
RF67*:1505mm