Table of Contents
Advertisement
ALARM FUNCTIONS
The alarm functions include the alarm recording, alarm checking alarm clear, and alarm
counter memory. (Refer to Alarm Recording, page 32)
CHECKING OF ALARM RECORDING
1
Press the MENU button
❿!
1. Place the
sign in the "ALARM
REC SETUP/RECALL" position
using the SHIFT
❷
❷
button.
❿ ❿
2. Press the SHIFT
button, then
the "ALARM RECALL" displays.
3. Press the MENU button after
checking.
ALARM RECALL
YEAR DATE
TIME
1
2001
12/25
19:00:00
2
2001
12/25
17:00:00
3
2001
12/25
15:00:00
4
2001
12/25
13:00:00
5
2001
12/25
12:00:00
6
END:MENU
PLA Y
JEC T
STO P/E
PO W
ER
1 2
1 1
1
33
•
When an alarm recording is not
made, there is no display on the
screen display.
•
The ALARM RECALL screen
displays the "6" most recent
alarm recorded events with the date
and time of each.
•
If the alarm is recorded at 12:00,
13:00, 15:00, 17:00 and 19:00 on
December 25, 2001.
REC
P/S TILL
CK
REC CHE
REFERENCE
Display of operating time
• When the front display indicates
2 2
COUNTER button twice.
The operating time is then indicated on the front display.
example) When operated for 11 hours.
HOUR
• If the counter button is not entered within 5 seconds
when checking the operating time, the status of the
front display returns to the state prior to checking the
display of operating time.
ALARM COUNTER MEMORY
1 1
Press the CNT. MEMO
• Press the CNT. MEMO button twice, then
the front display indicates "A. MEMO".
CNT MEMO
ALARM CLEAR
1
example) When the alarm recording is made
at No. 12.
Press the COUNTER button
• A-12 is indicated at the counter position
on the front display.
• From "
of alarm recording.
• It is possible to display up to "
• When the alarm recording is made, the
on " " the front display flashes.
COUNT
REFERENCE
The alarm sounds five times in the following cases;
• When a tape without an erasure prevention tab is inserted.
, press the
– When the series signal is entered. (long sound)
– When the alarm signal is entered.
– When the record button is pressed.
– When pressing TIMER button.
• When pressing the REC button with the tape ejected.
• When the alarm signal is entered during alarm recording.
2 2
Turn the SHUTTLE ring
clockwise or counterclockwise
• When turning the shuttle ring the tape
moves forward (backward). When it
arrives at the alarm recording in only
L3H mode encounted first, it pauses for
5 seconds and then stops.
A.MEMO
2
Press the CLEAR button
• The counter position on the front display
indicates "
• The " " is turned off.
• When pressing the CLEAR button while
", the "12" indicates the times
the alarm check screen is displayed, all
the data and time in memory are
"
erased.
CLEAR
The alarm sounds continuously in the following cases;
• When the tape arrives at its end in the recording mode.
• When the alarm signal is entered for alarm recording.
– When the alarm recording is ended the alarm is released.
– The alarm is released when pressing any button
– When the alarm signal is entered with the tape ejected.
(long sound)
Auto repeat recording
• When the rewinding is completed after the tape arrives at
its end, recording is restarted.
(The alarm sounds during rewinding only.)
• If alarm recording is made, tape is ejected.
".
34
Advertisement
Table of Contents
