Samsung SRP-370 User Manual page 38

GS B n
[Name] Turns white/black reverse printing mode on / off.
[Format] ASCII
Hex
Decimal
[Range] 0 ≤ n ≤ 255
[Default] n=0
[Description] ▪ Turns white/black reverse printing mode on or off.
- When the LSB of n is 0, white/black reverse mode is turned off.
- When the LSB of n is 1, white/black reverse mode is turned on.
GS H n
[Name] Selects the printing position of HRI characters.
[Format] ASCII GS
Hex 1D
Decimal 29
[Range] 0 ≤ n ≤ 3, 48 ≤ n ≤ 51
[Default] n=0
[Description] ▪ Selects the printing position of HRI characters when printing a bar code.
- n selects the execution of printing and the printing position as follows :
n Printing position
0, 48 Not printed.
1, 49 Above the bar code.
2, 50 Below the bar code.
3, 51 Both above and below the bar code.
GS I n
[Name] Transmits printer ID.
[Format] ASCII GS
Hex 1D 49
Decimal 29 73
[Range] 1 ≤ n ≤ 3, 49 ≤ n ≤ 51, 65 ≤ n ≤ 69, n=112
1 ≤ n ≤ 3, 49 ≤ n ≤ 51, 65 ≤ n ≤ 69, (when TM-T88II compatible mode is
[Description] selected.)
▪ Transmits the printer ID specified.
- n specifies the types of the printer ID.
n Printer ID type
1, 49 Printer model ID
2, 50 Type ID
3, 51 Firmware version ID
- n specifies the printer information.
n Printer ID type
65 Firmware version
66 Manufacturer
67 Printer name
GS B n
1D 42 n
29 66 n
H n
48 n
72 n
I n
n
n
ID
Hexadecimal : 2EH Decimal : 46
See table below.
Depends on firmware version.
ID
Depends on firmware version
BIXOLON
SRP-370/372
74
GS L nL nH
[Name] Set left margin.
[Format] ASCII GS
Hex 1D 4C
Decimal 29 76
[Range] 0 ≤ nL ≤ 255
0 ≤ nH ≤ 255
[Default] (nL + nH x 256)=0 (nL=0, nH=0)
[Description] ▪ Sets the left margin specified by nL and nH.
- The left margin is [(nL + nH x 256) x (horizontal motion units)].
Printable area
Left margin Printing area width
GS P x y
[Name] Set horizontal and vertical motion units.
[Format] ASCII GS
Hex 1D 50
Decimal 29 80
[Range] 0 ≤ x ≤ 255
0 ≤ y ≤ 255
[Default] For ANK/Multilingual model : x=180, y=360
For Japanese Kanji model : x=203, y=406
[Description] ▪ Turns white/black reverse printing mode on or off.
- For SRP-370
When x=0, the default setting of the horizontal motion unit is used.
When 1 ≤ x ≤ 255, the horizontal motion unit is set to 25.4/x mm {(1/x)"}.
When y=0, the default setting of the vertical motion unit is used.
When 1 ≤ y ≤ 255, the vertical motion unit is set to 25.4/y mm {(1/y)"}.
- For SRP-372
When x=0, the default setting of the horizontal motion unit is used.
When 1 ≤ x ≤ 255, the horizontal motion unit is set to 25.4/x mm {(1/x)"}.
When y=0, the default setting of the vertical motion unit is used.
When 1 ≤ y ≤ 255, the vertical motion unit is set to 25.4/y mm {(1/y)"}.
L nL nH
nL nH
nL nH
P x y
x y
x y
75