Page 1
Copyright 2003 by Harbor Freight Tools manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353 03664 ®...
Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically non-conductive clothes and non-skid footwear are recommended when working. Wear restrictive hair covering to contain long hair. SKU 03664 For technical questions, please call 1-800-444-3353. Specifications c i t "...
Page 3
Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools. Do not operate tool if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs.
Page 4
Respiratory diseases such as emphysema, bronchitis or pneumonia Safety precautions, such as using natural or forced air ventilation and wearing an ANSI approved respirator, are ESSENTIAL to reduce the risk of developing the above illnesses. SKU 03664 For technical questions, please call 1-800-444-3353. Also, •...
Page 5
MIG 200 Amp Welder 220 VAC Power Cord If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible. Insert the Torch Cable (connection end) into the cable strain relief on the end of the unit.
Page 6
Plug the line cord into a 220 VAC electrical outlet. 10. Flip the Power Switch on the front of the unit to the ON (I) position. The blower will start. SKU 03664 For technical questions, please call 1-800-444-3353. Cable Strain Relief Square Connector “C”...
Mechanism Argon/CO Hose Connector Controls and Indicators Wire Spool Welding Current Adjustment Knob: 30~200 Amps SKU 03664 For technical questions, please call 1-800-444-3353. Operation Nozzle Trigger Switch Torch Handle Wire Feed Speed Control Overheating Indicator - Red Trigger Switch On Indicator -...
Page 8
The wire feeds automatically at a speed dependent on the Min. or Max. current setting. The wire speed can also be adjusted using the Wire Feed Speed Control. SKU 03664 For technical questions, please call 1-800-444-3353. gas hose to the rear of the MIG Welder.
When the wire on the Feed Reel is used up, you will need to replace it as described on page 6, step 6 through step 13. l i o SKU 03664 For technical questions, please call 1-800-444-3353. Maintenance Parts List...
CENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. REV 06/05 SKU 03664 For technical questions, please call 1-800-444-3353. Page 11...