Table of Contents
Advertisement
Command timer
The clock must be set for this timer.
You can use the command timer to program a function that is to run automatically at
a particular time within the next 24 hours. The command series can contain up to four
commands, the first command must always be the selection of a mode key.
The following keys are not available for the remaining three commands: the mode
keys, the joystick (arrows and OK), MACRO, SETUP, EXIT.
You can create four command timers (Timer 1, Timer 2, Timer 3, Timer 4).
When the command is run this timer is automatically deleted.
Program the command timer
Example: This is how to program a command timer to control a recording on a DVD
recorder.
SETUP
Keep the
key pressed down for approx. 3 seconds,
CODE SETUP
until
appears.
SETUP
Press
briefly twice more to open
OK
SLEEPTIMER TV
Press
The
Use the arrows to select the
Press OK" The
TIMER 1 SET
OK
Press
The time when the command will be run appears.
The hours flash.
Use the arrows to set the hour and confirm by pressing
OK. The minutes flash.
Use the arrows to set the minutes and confirm by
pressing OK.
TIMER 1 MODE?
The
display prompts you to enter the command.
Use the mode key to select the device on which the command
should be performed.In our example,
was programmed on this key.
Press OK. You are prompted to make the first entry
KEY1
. Enter the first command. In our example: Use the number
keys to select the programme. If no other input is needed,
OK
or EXIT.
press
TIMER 1 KEY2
The
display appears. Enter the second
command.In our example: Press the Record key. The
KEY3
display appears after the second command.
In our example, press the Record key again.
SUCCESS
The
confirmation message appears along with the
bell symbol after the third command.
Lay the universal remote control down so that it is pointing towards the device and is
not obstructed.
You can cancel programming at any time by pressing EXIT.
3
If a command timer has already been entered, then
Helpline No. UK/ North Ireland 0871 37 61 020 Rep. Ireland 1-800-992 508
Web Support www.medion.co.uk
Model Number: 82663
TIMER SETUP
menu is displayed.
TIMER 1 SETUP
menu
display appears.
DVD
if the DVD recorder
TIMER 2
.
3
.
TIMER 1
TIMER 1
3
4
,
or
appears here.
18
Hide quick links:
Advertisement
Table of Contents
