Page 1
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.
SKU 3670 For technical questions, please call 1-800-444-3353. nOtIcE is used to address practices not related to personal injury. cAutIOn, without the...
Page 3
Prevent unintentional starting. Ensure the switch is in the off- position before connecting to power source and/or battery pack, picking SKU 3670 For technical questions, please call 1-800-444-3353. up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
Maintain labels and nameplates on the tool. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. Avoid unintentional starting. Prepare to begin work before turning on the tool. Do not lay the tool down until it has come to a complete stop.
SKU 3670 For technical questions, please call 1-800-444-3353. Vibration Safety This tool vibrates during use. Repeated or long-term exposure to vibration may...
Page 6
If the tool should electrically malfunction or break down, grounding provides a low resistance path to carry electricity SKU 3670 For technical questions, please call 1-800-444-3353. away from the user, reducing the risk of electric shock. (See 3-Prong Plug and Outlet.)
(32) and disconnect from power source before adjusting tool or installing a drill bit. To insert a drill bit, hold the rear ring of the Chuck (5) with one hand while turning the front end clockwise with the other hand to open the jaws.
Chuck rotation. Slide to the left side for forward Chuck rotation. See Figure 1. cAutIOn! Allow SKU 3670 For technical questions, please call 1-800-444-3353. Chuck to come to complete stop prior to changing its direction of rotation.
Secure the work piece to keep it from moving during the drilling operation. SKU 3670 For technical questions, please call 1-800-444-3353. Start by drilling slowly to keep the bit from moving away from your starting point.
For technical questions, please call 1-800-444-3353. PERIODIcALLY Screws (3) and tighten if necessary. If Carbon Brushes (14) are worn, contact Harbor Freight Tools for replacements and have a qualified service technician replace them. WARnIng! If the supply cord of this power tool is damaged, it must be replaced only by a qualified service technician.
If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 3670 For technical questions, please call 1-800-444-3353. PARtS LISt Qty.
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty...