Power Requirements; Power Mode Definitions; Spin-Up; Seek - Maxtor 4W100H6 Product Manual

Power Requirements

Power Requirements
Power Requirements Power Requirements Power Requirements
M OD E 12V

Power Mode Definitions

Power Mode Definitions Power Mode Definitions Power Mode Definitions Power Mode Definitions

Spin-up

Spin-up Spin-up
Spin-up Spin-up
The drive is spinning up following initial application of power and has not yet reached full speed.

Seek

Seek Seek
Seek Seek
A random access operation by the drive.

Read/Write

Read/Write Read/Write Read/Write Read/Write
Data is being read from or written to the drive.

Idle

Idle Idle Idle Idle
The drive is spinning, the actuator is parked and powered off and all other circuitry is powered on.
The drive is capable of responding to read commands within 40 ms.

Standby

Standby
Standby Standby Standby
The motor is not spinning. The drive will leave this mode upon receipt of a command that requires
disk access. The time-out value for this mode is programmable. The buffer is active to accept write data.

Sleep

Sleep Sleep Sleep Sleep
This is the lowest power state – with the interface set to inactive. A software or hardware reset is
required to return the drive to the Standby state.

EPA Energy Star Compliance

EPA Energy Star Compliance EPA Energy Star Compliance
EPA Energy Star Compliance EPA Energy Star Compliance
Maxtor Corporation supports the goals of the U.S. Environmental Protection Agency's Energy Star
program to reduce the electrical power consumption of computer equipment.

Environmental Limits

Environmental Limits
Environmental Limits Environmental Limits Environmental Limits
PARAM ETER
5V POW ER
OPER AT ING NON -OPER AT IN G/ST OR AGE
PRODUCT SPECIFICATIONS
3 – 3