Advertisement
Vaporetto 2400 NV
4a. The steam gun (2) is equipped with a safety switch (2A)
which prevents the accidental start of the steam jet by
children or people who do not know how to operate the
appliance. With the switch 2A in the "OFF" position, the
lever controlling the steam jet is locked. Should the
hose be left unattended for a moment whilst the appli-
ance is connected to the mains, it is recommended to
put the safety switch in the "OFF" position.
To start the steam jet, move the 2A switch backwards
(ON) and activate the steam request lever (fig.4). The first burst of steam may con-
tain some water droplets, due to imperfect thermic stabilisation inside the flexible hose.
We would therefore advise that the first jet of steam is played onto an old cloth until
a constant pressure of steam is obtained. Should the hose be submitted to an exces-
sive torsion during the use, the No-Volt device will stop the steam flux. In order to
restore the output, just press the steam request lever.
Note: The pressure indicator light (K) may go on and off from time to time during use of
VAPORETTO. This indicates the machine maintaining the correct and constant pressure
and is quite normal.
Some VAPORETTO models come equipped with a steam
regulator control (I) (Fig. 5). You can use this control to
increase the steam flow by turning in an anti-clockwise
direction. Turning the control in a clockwise direction
reduces the steam flow. Here are some suggestions for the
choice of steam flow level:
Strong steam: For encrusted dirt, stains, sanitising, grease
Normal steam: For carpets, rugs, glass, tiles etc.
Delicate steam: For vaporising plants and cleaning delicate
fabrics, upholstery, wallpaper etc. Please read separate
warning about use on draylon, velvet and other delicate
fabrics, or on sensitive wood surfaces.
To connect the accessories tools to the hand gun proceed
as follows (Fig. 6).
1b. Move the connector button (11) on the accessory to the
"open" position.
2b. Attach the required tool to the hand gun.
3b. Move the connector button (11) back to the position
"closed".
4b. Check that the connector button has engaged and the
accessory is fully connected.
S S
T T
E E
A A
M M
R R
E E
G G
S S
T T
E E
A A
M M
R R
E E
G G
C C
O O
N N
N N
E E
C C
T T
I I
O O
C C
O O
N N
N N
E E
C C
T T
I I
O O
U U
L L
A A
T T
I I
O O
N N
F F
E E
U U
L L
A A
T T
I I
O O
N N
F F
E E
N N
O O
F F
A A
C C
C C
E E
S S
N N
O O
F F
A A
C C
C C
E E
S S
Fig. 4
A A
T T
U U
R R
E E
A A
T T
U U
R R
E E
Fig. 5
+
S S
O O
R R
I I
E E
S S
S S
O O
R R
I I
E E
S S
Fig. 6
ENGLISH
–
Advertisement
