Do you have a question about the VAPORETTO SILVER and is the answer not in the manual?
Questions and answers
will stevenson
March 3, 2025
steam ready light will not go out on vt silver?
1 comments:
Mr. Anderson
March 3, 2025
The steam ready light on the POLTI VAPORETTO SILVER may not go out due to the following reasons:
1. Insufficient Heating Time – The unit may not have reached the required temperature. It typically takes around 10 minutes for the steam ready light to turn off. 2. Malfunction or Breakdown – If the light remains on despite waiting, there may be a fault in the heating element or thermostat. In this case, it is advised to contact an authorized service center. 3. Power Supply Issues – If the unit is not receiving sufficient power, it may not heat properly, preventing the light from turning off. 4. Limescale Build-Up – If there is excessive limescale inside the generator tank, it can affect heating efficiency. Regular descaling with KALSTOP FP 2003 is recommended to prevent this issue.
If the problem persists, it is best to have the unit checked by an authorized technician.
Page 2
This is a preventive against scale build-up and protects the metal walls of the steam generator tank. KALSTOP is available from Polti dealers or by mail-order from your Polti Service Centre.
Page 3
V A P O R E T T O S I L V E R Fig. A Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 – Fig. 6 Fig. 7...
Page 4
’ ’ ’ ’ All POLTI machines are equipped with the unique Polti patented safety cap, which pre- vents opening of the generator tank as long as there is any pressure remaining inside the tank. This is an important and indispensable safety device, and it is necessary to follow This appliance is intended for use as a steam generator as described and in accordance certain procedures when re-filling the tank.
Page 5
50 centimetres distance from the surface to be cleaned. • If repairs or replacement parts are required, use only original Polti replacement parts. • For care of your plants vaporise at a minimum distance of 50 centimetres.
Need help?
Do you have a question about the VAPORETTO SILVER and is the answer not in the manual?
Questions and answers
steam ready light will not go out on vt silver?
The steam ready light on the POLTI VAPORETTO SILVER may not go out due to the following reasons:
1. Insufficient Heating Time – The unit may not have reached the required temperature. It typically takes around 10 minutes for the steam ready light to turn off.
2. Malfunction or Breakdown – If the light remains on despite waiting, there may be a fault in the heating element or thermostat. In this case, it is advised to contact an authorized service center.
3. Power Supply Issues – If the unit is not receiving sufficient power, it may not heat properly, preventing the light from turning off.
4. Limescale Build-Up – If there is excessive limescale inside the generator tank, it can affect heating efficiency. Regular descaling with KALSTOP FP 2003 is recommended to prevent this issue.
If the problem persists, it is best to have the unit checked by an authorized technician.
This answer is automatically generated