Harbor Freight Tools 97092 Set Up And Operating Instructions

HigH REACH ROPE
sEt uP And OPERAting instRuCtiOns
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Read this material before using this product.
Failure to do so can result in serious injury.
sAVE tHis MAnuAl.
Copyright
this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the product's serial number
in the back of the manual near the assembly diagram (or month and year of purchase if
product has no number). Keep this manual and the receipt in a safe and dry place for
future reference.
wARning! Read all instructions
Failure to follow all instructions listed below may result in serious injury.
1. Keep work area clean and well lit.
2. Keep children and bystanders away while operating a Chain saw.
tions can cause you to lose control.
3. Stay alert, watch what you are doing and use common sense when operating a
Chain Saw. Do not use this product while you are tired or under the influence
of drugs, alcohol or medication. A moment of inattention while operating Chain
Saws may result in serious personal injury.
4. use safety equipment. Always wear eye protection.
such as dust mask, non-skid safety shoes, ANSI approved hard hat, full
face shield, and work gloves should be used for appropriate conditions to
reduce personal injuries.

CHAin sAw

Model
distributed exclusively by Harbor Freight tools
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
©
2007 by Harbor Freight Tools

general safety Rules

97092
®
. All rights reserved. No portion of
Cluttered or dark areas invite accidents.
®
.
Distrac-
Safety equipment