Polaroid Freescape User Manual page 10

Setting up a Wireless Connection
1. Power on the photo frame. Select Setup to enter the main menu.
2. Select Network > Wireless LAN under the SETTINGS menu.
3. Select "Manual Configuration", then click "OK" to enter.
4 Select a network to join. You may be prompted to enter a password. Once the photo frame
is associated with a network, you will have access to all the servers on the network. Select
any available server as a favorite. Doing so gives you quicker access to the media on that
server through the applications.
Note:
1. Before setting the wireless connection, connect your PC to a wireless router device.
2. The MVSN media server is one server option when setting up. It is the only server
where we can guarantee playlists will be correctly saved.You also have access to other
servers (like WMP 11, or any DLNA-compliant server) on the same network.
3. The wireless signal received by the photo frame is limited by the signal strength of your
wireless router. Note the photo frame won't obtain an IP address if it is out of range of
the wireless router.
0