Table of Contents
Advertisement
Polaroid • Settings
BELKIN:
1. Login router
2. Choose "Firewall" , select "Virtual Servers"
3. Input the port (except 80) and IP address, then click SAVE.
NOTE: The port and IP address should be same as camera.
Figure 7.6
40
DLINK:
1. Login the router
2. Choose "Advanced" , select "Virtual Servers"
3. Input the port, IP address, Protocol, then click SAVE.
NOTE: The public port and the private port should be the same as the camera's
port; choose protocol to be "both"
After all steps are complete you may use DDSN freely. or check the DDNS status
from your camera and get the DDNS link for internet view. See figure below.
Steps: Login, System, Device Info in that order.
IP350 Manual
Polaroid • Settings
Figure 7.7
Figures 7.8
41
Advertisement
Table of Contents
