Polaris NRX-5 User Manual page 4

9021NRX5.qxd 8/12/2003 2:04 PM Page 4
NRX-5 - Display Feature Phone
1.2.3 Set Time
Scroll to 'SET TIME' on the System Menu and then press the SELECT button. Use
the scroll buttons to adjust to the desired time and date using the SELECT button
for confirmation after setting HOUR, MINUTE,
DATE & MONTH.
1.2.4 Set Recall
Scroll to 'SET RECALL' on the System Menu and then press the SELECT button.
Use the scroll buttons to adjust the required setting of either TBR (Timed Break
Recall) or EARTH (Earth Recall) then press the SELECT button to confirm.
If TBR is selected, after pressing the SELECT button you will need to use the scroll
buttons to select the TBR timing (100ms to 1200ms). Once again press the
SELECT button to confirm your selection. The stanormally 100ms. The standard
setting for Australia is normally 100ms.
NOTE: By default your NRX-5 is factory set at TBR 100ms.
1.2.5 Set LCD Contrast
Scroll to 'LCD CONTRAST' on the System Menu and then press the SELECT
button. Use the scroll buttons to adjust to the desired LCD contrast then press the
SELECT button. The default setting is 4.
1.2.6 Set Message Waiting Type
Scroll to 'MESSAGE WAITING' on the System Menu and then press the SELECT
button. Use the scroll button to select one of the three options LINE REVERSAL,
HICOM or 90V DC then press the SELECT button. .
If Line Reversal is selected - Use the scroll buttons to select Polarity Normal, Polarity
Reversal or OFF and then press the SELECT button. This should be set to OFF if
Line Reversal is not required.
4