Table of Contents
Advertisement
9021NRX5.qxd
8/12/2003
1. INSTALLATION
Connect the small plug (RJ-11) of the telephone line cord to the socket at the
back of the unit and the other plug to the telephone socket at the wall.
Connect the AC adaptor into a standard 220-240VAC mains socket and the
power socket at the back of the NRX-5.
The New Call LED will light for about 1 second and the display will show
00-00-00. After about 4 seconds the display will show TOTAL:00 NEW:00
If you have subscribed to a Caller ID Service, the time and date will be auto-
matically updated when the first call is received. Otherwise, it is necessary to set
the time and date manually, please refer to the Telephone Setup Menu
In case of power failure or accidental unplugging of the AC adaptor, the built-in
EEPROM will retain all the telephone's memory including phone book and CID
records.
1.2 Telephone Set-Up
1.2.1 In standby mode, press the MENU button twice, the display will show
SYSTEM.
1.2.2 Using the SCROLL
modes of the main System Menu loop as shown below:
2:04 PM
Page 3
NRX-3 - Display Feature Phone
or
buttons will switch among the various setting
SET TIME
BACKLIGHT
TIME MODE
DIAL MODE
NRX-5 - Display Feature Phone
SET RECALL
LCD CONTRAST
MESSAGE
WAITING
3
Advertisement
Table of Contents
