Table of Contents
Advertisement
4 COMPONENT IN / AV IN
–
Connect component video cables (optional) to component connector (P
to corresponding component video out connectors on the DVD.
–
If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the DVD and connect the
DVD to component connector (P
–
The P
, P
R
B
–
Connect RCA audio cables (optional) to [R-AUDIO-L] on the rear of your set and the other ends to corresponding audio
out connectors on the DVD.
–
The COMPONENT IN jack is also used as the AV IN 1 jack.
Connect the video cable to the COMPONENT IN [Y/VIDEO] jack and the audio cable to the COMPONENT IN [R-AUDIO-
N
L] jacks.
5 H (HEADPHONE)
–
Headphone may be connected to the headphone output on your set. While the head phone is connected, the sound from
the built-in speakers will be disabled.
Using the sound function is restricted when connecting headphones to the TV.
N
Prolonged use of headphones at a high volume may damage your hearing.
N
You will not hear sound from the speakers when you connect headphones to the TV.
N
The headphone volume and TV volume are adjusted separately.
N
6 KENSINGTON LOCK
–
The Kensington Lock (optional) is a device used to physically fix the system when used in a public place. If you want to
use a locking device, contact the dealer where you purchased the TV.
The location of the Kensington Lock may be different depending on its model.
N
BN68-02101Z-00Eng.indb 5
, P
, Y) on your set.
R
B
and Y connectors on your component devices DVD are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.
, P
, Y) on the rear of your set and the other ends
R
B
English -
2009-08-04
8:57:12
Advertisement
Table of Contents
