Colour System Selection (Different Region Use Differing Systems) - Panasonic TX-15LT2F Operating Instructions Manual

Tuning menu
Colour System Selection
If a clear picture with correct colours cannot be obtained when a Broadcast or AV signal is received.
1
2
Note:
• PAL, SECAM and NTSC are different colour signal broadcast transmission systems applicable to differing countries.
• M.NTSC is a trick playback mode used in special VCR to playback NTSC recorded video tapes through PAL
television equipment.
• During RGB input signal in AV1 mode, PAL and SECAM are not available.
3
(When in TV mode)
STR
TV/AV
(When in AV mode)
TV/AV
22
Press to select the Colour System.
Press to produce the optimum image.
The Colour system will change as shown.
(When in TV mode)
AUTO
M.NTSC
(When in AV mode)
AUTO PAL
M.NTSC
Press to store the selected Colour System.
Press to exit from the Colour System.
This returns the set to the normal viewing condition.
Press to exit from the Colour System.
This returns the set to the normal viewing condition.
The selected Colour System is automatically memorised.
(Different region use differing systems)
PAL
SECAM
SECAM
NTSC
Tuning menu
Programme edit
Auto setup
Manual tuning
Fine tuning
Colour system
Auto
Volume correc.