Panasonic Viera TX-L47ET50B Operating Instructions Manual page 9

Assembly screw (4)
●
XSS5+15FNK
M5 × 15
Assembly screw (4)
●
XYN4+F10FJK
M4 × 10
■
Preparations
Take out the pedestal and the TV from the packing case and put the TV onto a
work table with the screen panel down on the clean and soft cloth (blanket, etc.)
●
Use a firm table bigger than the TV.
●
Do not hold the screen panel part.
● Make sure not to scratch or break the TV.
■
Assembling the pedestal
Attach the bracket to the tabs of the top of the base
assembly screws
●
Forcing the assembly screws the wrong way will strip the threads.
● Hold the bracket not to fall over.
■
Securing the TV
1
Attach the pedestal
2
Attach the cover
Attach the cover and fix securely with assembly screws
C
Assembly screw (2)
●
XYN4+F10FJK
M4 × 10
Bracket
●
TBL5ZA30091
tabs
B
E
Cover
●
TBL5ZB30092
and fix with
Front
Align the 3 tabs on the bracket with the
grooves on the back of the TV and insert
them.
Make sure the centre tab is in the hole
of the TV. Slide in the bracket aligning
the arrow marks (↓↑) on the TV and the
bracket.
Tighten the 4 assembly screws
at first, then tighten them firmly to fix
securely.
.
Base
●
TBL5ZX04401
(TX-L42ET50B)
● TBL5ZX0218
(TX-L47ET50B)
A
Tabs (top)
D
F
loosely
9