Panasonic Viera TX-L47ET50B Operating Instructions Manual page 40

Menu Item
Intelligent Frame
Creation
24p Smooth Film
Clear Cinema
3D Refresh Rate
16:9 Overscan
DVI Input Setting
Reset to Defaults
Mode
40
Adjustments / Configurations (alternatives)
Automatically compensates the picture frame rate and removes juddering
movements to make the images smooth [Off] / [Min] / [Mid] / [Max]
●
Depending on the contents, images may be noisy. To prevent the noise, change
the setting.
● Not valid on PC mode or when [Viewing Mode] is set to [Game]
Automatically compensates the picture frame rate to make the 24p source movie
images smooth [Off] / [Min] / [Mid] / [Max]
●
This is available only for 24p signal input and displayed instead of [Intelligent
Frame Creation].
● Not valid on PC mode or when [Viewing Mode] is set to [Game]
Improves vertical resolution for movie images [Off] / [On]
●
This function is available for the interlaced signal (except in the mode of PC,
VIERA Connect or when [Viewing Mode] is set to [Game]).
Reduces juddering and flicker noises of the 3D images when using the 3D
Eyewear [Auto] / [100Hz] / [120Hz]
[100Hz]:
If light appears to flicker under fluorescents (or dimmers) of 50 Hz.
[120Hz]:
If light appears to flicker under fluorescents (or dimmers) of 60 Hz. If flicker
noises appear with 50 Hz input signal.
Selects the screen area displaying the image [Off] / [On]
[On]:
Enlarges the image to hide the edge of the image.
[Off]:
Displays the image in the original size.
● Set to [On] if noise is generated on the edge of the screen.
●
This function is available when aspect is set to [Auto] (16:9 signal only) or [16:9].
●
This function can be memorised separately for SD (Standard definition) and HD
(High definition) signals.
● Not valid on PC mode or VIERA Connect
Changes the black level of the image for HDMI input mode with DVI input signal
manually [Normal] / [Full]
●
When the DVI input signal from the external equipment (especially from PC) is
displayed, the black level may not be suitable. In this case, select [Full].
● The black level for HDMI input signal will be adjusted automatically.
● For HDMI input mode with DVI input signal
Press the OK button to reset the current Picture Viewing Mode to the default settings
Selects your favourite sound mode [Music] / [Speech] / [User]
●
The selected mode affects all input signals.
[Music]:
Improves sound quality for watching music videos, etc.
[Speech]:
Improves sound quality for watching news, drama, etc.
●
In Music and Speech modes, you can adjust [Bass] and [Treble] settings, and
those settings will be stored for each mode.
[User]:
Adjusts the sounds manually by using the equaliser to suit your favourite sound
quality.
●
For the User mode, [Equaliser] will appear on the Sound Menu instead of [Bass]
and [Treble]. Select [Equaliser] and adjust the frequency. [Equaliser] (p. 41)