Installation; Maintenance - Panasonic Viera TX-20LX6 Operating Instructions Manual

Lcd tv
Table of Contents

Advertisement

INSTALLATION

Please use the apparatus only with the stands supplied or with the appropriate wall mount kits.
Receiver Location
Locate for comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on the
screen.
Use of some types of fluorescent lighting can reduce remote control transmitter range.
Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or
moisture.
Optional External Equipment
The Video/Audio connection between components can be made with shielded video and audio cables. For best perfor-
mance, Antenna cables should utilize 75 Ohm coaxial shielded wire. Cables are available from your dealer or electronic
supply store.
Before you purchase any cables, be sure you know what type of output and input connectors your various components
require. Also determine the length of cable you'll need.
For optimum quality picture
When the LCD is exposed to light from outdoors or lighting fixtures, high-contrast pictures may not be displayed clearly.
Turn off fluorescent lamps near the LCD and place in location not exposed to outdoor light.
How to use the LCD stand
Adjust the stand to your desired angle. The stand angle can be adjusted to until 10 degree maximum backwards:

MAINTENANCE

To clean this unit, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth dipped in a soap and water solution or a weak
detergent solution.
• Use eyeglass cleaner to remove stubborn dirt from the LCD.
• Never use alcohol, paint thinner or benzine to clean this set.
• Before using a chemically treated cloth, carefully read the instructions that
came with the cloth.
• Do not wipe the LCD with water.
Wipe the cabinet with a soft cloth.
If the cabinet is heavily soiled, wipe with a well-wrung soft cloth dipped in kitchen cleanser
(neutral) diluted with water.
CAUTION: If water or similar substances get inside the monitor via the liquid crystal panel surface, a malfunction
may result.
10°
5

Advertisement

Table of Contents
loading

Table of Contents