Panasonic Viera TX-L42U10EA Operating Instructions Manual page 23

Operating the equipment with the TV remote control
The equipment connected to the TV can be directly operated with the below buttons of this TV
remote control.
PROGRAMME
REC
How to change the code for the type of the equipment
Each type of the Panasonic equipment has its own remote control code.
Please change the code according to the equipment you want to operate.
If you operate the connected equipment in VIERA Link (p. 52), select the code "73".
Press and hold
Enter the appropriate code,
see table below
Type of the equipment
DVD Recorder, DVD Player
Player theatre, Blu-ray Disc theatre
VCR
The equipment using in VIERA Link
"VIERA Link Control" (p. 52)
Note
Confirm if the remote control works correctly after changing the code.
The codes may be reset to default values if batteries are replaced.
Some operations may not be possible on some equipment models.
Standby
Set to Standby mode / Turn on
Play
Playback videocassette / DVD
Stop
Stop the operations
Rewind / Skip / Search
VCR: Rewind, view the picture rapidly in reverse
DVD: Skip to the previous track or title
Press and hold to search backward
Fast-forward / Skip / Search
VCR: Fast-forward, view the picture rapidly forward
DVD: Skip to the next track or title
Press and hold to search forward
Pause
Pause / Resume
DVD: Press and hold to play at slow speed
Channel Up / Down
Select channel
Record
Start recording
during the following operations
Code
70 (default)
71
72
73
Press
23