Maintenance And Servicing; Troubleshooting - HAUL MASTER 96462 Set Up And Operating Instructions Manual

WArNINg WArNINg
1. BEFORE EACH uSE, inspect the general condition of the tool. Check for loose
screws, misalignment or binding of moving parts, cracked or broken parts, and
any other condition that may affect its safe operation.
2. AFTER uSE, clean external surfaces of the Sway Control unit with a garden
hose. Then dry and lubricate all moving parts. Do not use solvents.
3. CAuTION! All maintenance, service, and repairs not mentioned in this manual
must only be performed by a qualified service technician.
problem
Sway Control unit
contacts trailer
frame or tow vehicle
bumper when
backing up in a
jackknife position.
Not enough sway
control.
SKU 96462 For technical questions, please call 1-800-444-3353.

mAINTENANCE ANd SERVICINg

Risk of serious personal injury. Keep hands, fingers,
and body safely away from the Sway Control unit before
performing any inspection or maintenance procedures.
damaged equipment can fail, causing serious personal
injury. do not use damaged equipment. If abnormal noise or
vibration occurs, have the problem corrected before further
use.
Cleaning, maintenance, and lubrication

Troubleshooting

possible Causes
road and weather conditions,
loading and design of trailer, power
steering, wheel alignment, and
other factors can affect towing
characteristics.
Sway control tension insufficient.
probable Solutions
Disconnect Sway Control unit from tow
vehicle when backing up.
Adjust Brake Torsional Screw 1/4 turn
clockwise. repeat if necessary until
proper sway control is achieved. Larger
or heavier or broad-sided trailers may
require the use of two Sway Control
units.
Page 10