Controls And Displays; Front Panel - Pioneer VSX-C402 Operating Insructions

Controls and displays

04
Chapter 4
Controls and displays

Front panel

1 2
1 PHONES jack
When headphones are connected there is no sound
output from the speakers.
2 STANDBY/ON button
Press to switch the receiver on or into standby.
3 FRONT INPUT jacks (page 13)
Use to connect an audio/video component.
4 AV DIRECT indicator (page 34)
Lights in standby when the receiver is passing an audio/
video signal from one SCART AV connector to another.
5 Digital surround format indicators
2 DIGITAL indicator
Lights when the current source is Dolby Digital.
DTS indicator
Lights when the current source is DTS.
6 Listening mode indicators
STEREO indicator (page 24)
Lights when the source is stereo and/or the listening
mode has been set to STEREO.
2 PRO LOGIC II indicator (page 24)
Lights when one of the Dolby Pro Logic II surround
modes is active with a 2 channel (stereo) source.
ADVANCED indicator (page 25)
Lights when one of the Advanced Surround modes is
active.
PHONES indicator (page 24)
Lights when phones surround mode is active.
SOUND MODE indicator (page 25)
Lights when one of the Sound Modes is active.
18
En
3 4
STANDBY/ON
AV DIRECT
FRONT INPUT
DIGITAL IN
VIDEO L AUDIO R
PHONES
5 6
2 2
DIGITAL DTS STEREO PRO LOGICII ADVANCED PHONES SOUND MODE
7 Remote control sensor
8 INPUT SELECTOR knob (page 23)
Turn to cycle through the various inputs. The current
input is shown in the front panel display.
9 MASTER VOLUME knob
Use to adjust the volume.
7 8
VSX-C402
AUDIO/VIDEO MULTI-CHANNEL RECEIVER
MASTER
INPUT SELECTOR VOLUME
R
DOWN UP
9