Progressive Television Picture - Panasonic Diga DMR-EZ25EB Operating Instructions Manual

Connection to COMPONENT VIDEO terminal
Setup
TV Aspect
Progressive
Tuning
TV System
Disc
HDMI Settings
Picture
Sound
AV1 Output
Display
AV2 Settings
AV1 Output
Connection
SELECT
Video ( with component )
Others
SELECT
ENTER
S Video ( with component )
ENTER
RETURN
RGB 1 ( without component )
RGB 2 ( without component )
RGB output is available all the
time while this unit is on.
Setup TV Aspect
Progressive
Tuning
TV System
Disc
HDMI Settings
Picture
AV1 Output
Sound
AV2 Settings
Display
Connection
Others
COMPONENT VIDEO OUT terminal
The terminals can be used for INTERLACE or PROGRESSIVE output and deliver a
clearer picture than the S VIDEO OUT terminal. Connections via these terminals output
the colour difference signals (P
Colours can be reproduced true to the original colour. The properties of the
COMPONENT VIDEO input terminal are dependent on the TV or screen.
Connecting a TV with COMPONENT VIDEO input terminals
16:9
If your TV with LCD or plasma screen supports the progressive process, connect it
On
to the COMPONENT VIDEO OUT terminals.
PAL
If you want to enjoy full progressive video, set Progressive to [On].
RGB 1 If the AV1 Output setting in the Setup menu is set to [RGB 1/2 ( without component )],
there is no output to the COMPONENT VIDEO OUT terminals.
Set this option to [Video ( with component )].
If the unit is connected to the TV via the S VIDEO OUT or the AV1 terminal, output
TAB
RETURN
is Interlace regardless of the settings
Press FUNCTIONS.
16:9
Select [To Others] with
On
Select [Setup] with
PAL
Select [Connection] with
Select the option [On] with
Video

Progressive television picture

The progressive picture aspect ratio (height to width) is set to 16:9. DVD-Video with a
picture aspect ratio of 16:9 is properly displayed. However, video material with an
image page ratio of 4:3 is shown stretched from right to left. If it is possible to adjust
the picture aspect ratio on your television, select the setting [Progressive - On].
Progressive-compatible televisions (PAL)
To use progressive output select in the setup menu [Progressive - ON] for
component output, or [576p or 720p] for HDMI output. This may cause
flickering of TV Guide, information banner or subtitles display on some
televisions (CRT, LCD or plasma).
In this case change progressive mode to OFF for component output, or
select 576i or 1080i video format for HDMI output.
/P ) and the brightness signal (Y) separately.
B R
.
and confirm with ENTER.
and confirm with ENTER.
, [Progressive] with ,
and confirm with ENTER.
44
and confirm with ENTER.
44 45
99
55