3 Getting started
This section helps you with the first time
installation of the USB 2.0 card reader/writer.
3.1 Connect car reader/writer
Carefully read the safety precautions in sec-
tion 1.1 Safety before you connect the USB
2.0 card reader/writer.
1. Plug the larger end of the USB cable (A)
into the USB port on the computer.
2. Plug the smaller end of the USB cable (B)
into the card reader/writer.
You can disconnect the card/reader from the
computer without using the "Safely remove
hardware" or "Eject" function.