First-Time Operation - Panasonic CF-W2 Series Operating Instructions Manual

First-time Operation

Battery Pack
1
3
2
12
Read the steps below to help you learn what parts are included, and to gain an understanding of
some basic computer-related operations.
1
Confirm the inclusion of all parts.
Make sure the parts shown in the figure have been supplied. If any of these items are
missing or is not working properly, contact your technical support office (
AC adaptor .......... 1
Model No : CF-AA1623A
Product Recovery
DVD-ROM ............ 1
2
Read the LIMITED USE LICENSE AGREEMENT.
Before removing the seal covering the power switch, read the LIMITED USE LICENSE
AGREEMENT.
3
Turn the computer over and insert the battery pack.
Slide the left-side latch (A) to the unlock position (
1
2 Make sure the battery pack is facing the correct direction, slide it in the direction of
the arrow.
2
Slide the left-side latch to the lock position ( ), and then check to ensure that the
3
battery pack is held firmly.
(Right-side latch is locked automatically.)
CAUTION
Be sure the battery pack is properly connected to the connector.
Do not touch the terminals on the battery pack and the computer. The battery
pack may no longer function properly if the contacts are dirty or damaged. Also,
the computer may not operate properly.
Before using the battery pack, carefully read "Precautions (Battery Pack)"
(
Latch
4
Open the display.
Slide the latch located at the front.
1
Lift open the display.
2
CAUTION
1
Do not open the display wider than necessary (135° or more).
Do not apply excessive pressure to the LCD. Also, do not hold the LCD when
opening or closing the display.
LCD
AC Cord ...............1
Modem Telephone
Cable ...................1
page 7).
page 45).
Battery Pack ........1
Model No :CF-VZSU27
Operating Instructions
.................... 1
(This book)
®
Windows Book .... 1
( page 30)
).