Panasonic Viera TX-P42G30E Operating Instructions Manual page 12

Example 3
Connecting DVD Recorder / VCR and Set top box
TV, DVD Recorder / VCR and Set top box
Rear of the TV
AC 220-240 V
50 / 60 Hz
Mains lead
(supplied)
■
Connecting to the network environment (Network connections)
To enable the network service functions (VIERA Connect, etc.), you need to connect the TV to a broadband network
environment.
•
If you do not have any broadband network services, please consult your retailer for assistance.
•
Connect with LAN cable (Wired connection) or Wireless LAN Adaptor (Wireless connection).
•
Setup of the network connection will start after the tuning (when first using the TV)
Rear of the TV
Wired connection
Less
than
10 cm
Note
•
For more information of the network connections
12
Fully wired HDMI
compliant cable
Wireless connection
Wireless LAN Adaptor and Extension cable
"Optional accessories" (p. 6)
•
Connect to the USB 1, 2 or 3 port.
LAN cable
Less
than
10 cm
Internet
environment
Fully wired
SCART cable
Set top box
Ferrite core (supplied)
Installing the Ferrite core
Pull back the tabs Wind the cable
(in two places) twice
(p. 72)
Terrestrial aerial
Cable
RF cable
Fully wired
SCART cable
DVD Recorder or
VCR
RF cable
RF OUT
(p. 14 - 16)
Internet
environment
Access point
Press the cable
through and close
RF IN