Panasonic TX-22LT3 Operating Instructions Manual page 9

Lcd tv
Hide thumbs Also See for TX-22LT3:
Table of Contents

Advertisement

Quick Start Guide
4
Auto set up
CH44
AUTO SETUP IN PROGRESS
SEARCHING :
Stored
CH44
21
TV/AV
: To exit
TV to VCR /DVD recorder download
If a Q-Link, NEXTVIEWLINK or compatible recording device has been connected to the correct Scart
socket before starting Step 1, programme information will be downloaded to the device via Q-Link.
Downloaded tuning data will match the television's.
Not all recording devices support this download of programme information, some may require to be
started manually. Refer to the device's operating instruction book.
lf a recording device other than those described above has been connected, then there will be no download
operation.
Note:
If the recording device has not accepted download data from the TV, you may need to select the
Download option from the device's menu system.
Refer to the recording device's operating instruction book.
If Q-Link is not operating correctly, check the following:
• The Scart lead is connected to the TV's correct Scart socket.
• The Scart lead is connected to the VCR's compatible (Q-Link, NEXTVIEWLINK or similar technology) Scart socket.
• The Scart lead is a "fully wired" type.
For further information on Q-Link and connecting equipment, see pages 13 and 31.
• The sorted programme order depends upon the TV signal, the broadcasting system, and reception
conditions.
If the order is not to your preference it can be rearranged. Refer to the Programme edit menu - see page
18 for details.
• If you have a digital satellite receiver, you can start Auto setup with the receiver set to any channel. You
will then have to manually name the 'SAT' position after Auto setup is complete. Refer to the Programme
edit - see page 19 for details.
Prog. Position All channels
1
2
3
4
5
6
7
Note:
The next available channel will appear, If no other stations are available then the Programme position will remain nunsed.
First, ensure that the recording device is in Standby mode, if it
has Q-Link function and Satellite receiver is switched ON.
If the TV has not been programmed for you then Auto setup will
begin, your stations will be located, sorted into order and stored ready
for use (refer to page 20).
PLEASE WAIT
68
No CH5
No CH5/S4C No CH4/CH5
BBC1
BBC1
BBC2
BBC2
ITV
ITV
CH4
CH4
S4C
S4C
CH5
SAT
SAT
BBC1
BBC1
BBC2
BBC2
ITV
ITV
CH4
S4C
SAT
SAT
No S4C
No CH4/S4C
BBC1
BBC1
BBC2
BBC2
ITV
ITV
CH4
CH5
CH5
SAT
SAT
No CH4/S4C/CH5
BBC1
BBC2
ITV
SAT
9

Advertisement

Table of Contents
loading

Table of Contents