Table of Contents
Advertisement
Quick Start Guide
4. Q-Link connection of TV, VCR/DVD recorder and Satellite Receiver using Scart and RF leads
AV1
Scart socket
Antenna Input
RF lead
Satellite
Recevier
Antenna Output
Antenna
Input
terminal
Antenna Input socket
AV2
Scart socket
terminal
TV Scart
socket
VCR Scart
socket
terminal
AV2
Scart
socket
AV1
Scart socket
VCR/DVD
recorder
Antenna Output
terminal
For Q-Link to function correctly this set,
VCR and Satellite Receiver must be
connected as shown in the diagram.
RF connections
• Connect an RF lead to the Antenna Input
terminal of the Satellite Receiver.
• Connect an RF lead from the Antenna
Output terminal of the Satellite Receiver to
the Antenna Input terminal of the VCR.
• Connect an RF lead from the Antenna
Output terminal of the VCR to this set
Antenna Input socket (
Scart connections
'Fully wired' Scart leads should be used for
all of the Scart connections.
• The AV2 Scart socket of the VCR must be
connected to the VCR Scart socket of the
Satellite Receiver.
• The TV Scart socket of the Satellite
Receiver must be connected to the AV1
Scart socket of this set.
• For Scart socket wiring information see page
33.
Notes:
• Additional equipment and leads are not
supplied.
• Further details of audio/ video connections
can be found on page 31.
• If your VCR is not a 'Q-Link' VCR, please
consult your VCR operating instruction
book.
).
7
Advertisement
Table of Contents
