Panasonic Viera TX-P42ST50Y Operating Instructions Manual page 9

■
Securing the TV
Use the assembly screws
TX-P50ST50Y) or (TX-P55ST50Y) to fasten
securely.
● Tighten the four assembly screws loosely at first, then
tighten them firmly to fix securely.
●
Carry out the work on a horizontal and level surface.
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1 Remove the assembly screws
2 Pull out the pedestal from the TV.
3 Remove the assembly screw
4 Remove the assembly screws
5 Remove the assembly screws
Adjusting the panel to your desired angle
●
Do not place any objects within the full rotation range.
Preventing the TV from falling over
Using the fall-prevent screw hole and a screw (commercially available), securely fix the body of the pedestal to the
installation surface.
● The place where the pedestal is to be fixed should be thick enough and made of hard material.
(TX-P42ST50Y,
(TX-P42ST50Y, TX-P50ST50Y) or
from the cover.
from the bracket.
from the back of the base and pull out the neck.
(View from the top)
Arrow mark
(TX-P55ST50Y) from the TV.
TX-P42ST50Y: 15°
TX-P50ST50Y: 10°
(TX-P42ST50Y, TX-P50ST50Y)
Screw (not supplied)
Diametre: 3 mm
Length: 25 - 30 mm
Screw hole
A / B
Hole for pedestal
installation
9