Panasonic Viera TX-P42ST32Y Operating Instructions Manual page 38

Menu Item
16:9 Overscan
AV Colour System
DVI Input Setting
Pixel Orbiter
Scrolling Bar
Reset to Defaults
Mode
Bass
Treble
38
Adjustments / Configurations (alternatives)
Selects the screen area displaying the image [Off] / [On]
[On] :
Enlarged the image to hide the edge of the image.
[Off] :
Displayed the image in the original size.
•
Set to [On] if noise is generated on the edge of the screen.
•
This function is available when aspect is set to [Auto] (16:9 signal only) or [16:9].
•
This function can be memorized separately for SD (Standard definition) and HD (High
definition) signals.
•
Not valid on VIERA Connect
Selects optional colour system based on video signals in AV mode
[Auto] / [PAL] / [SECAM] / [M.NTSC] / [NTSC]
Changes the black level in the image for HDMI input mode with DVI input signal
manually [Normal] / [Full]
•
When the DVI input signal from the external equipment, especially from PC, is
displayed, the black level may not be suitable. In this case, select [Full].
•
The black level for HDMI input signal will be adjusted automatically.
•
For HDMI input mode with DVI input signal only
Selects the mode for wobbling of the image to prevent panel "image retention"
[Auto] / [On]
[Auto] :
Automatically works only for the appropriate images and you rarely recognise the
wobbling.
Scrolls the vertical bar to prevent panel "image retention"
•
Press the OK button to start scrolling and press any buttons (except Standby) to exit
this mode.
Press the OK button to reset the present Picture Viewing Mode of the selected input to
the default settings
Selects the basic sound mode [Music] / [Speech] / [User]
•
The selected mode affects all input signals.
[Music] :
Improves sound quality for watching music videos, etc.
[Speech] :
Improves sound quality for watching news, drama, etc.
•
In Music and Speech modes, you can adjust [Bass] and [Treble] settings, and those
settings will be stored for each mode.
[User] :
Adjusts the sounds manually by using the equaliser to suit your favourite sound
quality.
•
For the User mode, [Equaliser] will appear on the Sound Menu instead of [Bass] and
[Treble]. Select the [Equaliser] and adjust the frequency.
Increases or decreases level to enhance or minimise lower, deeper sound output
Increases or decreases level to enhance or minimise sharper, higher sound output
[Equaliser] (p. 39)