Panasonic DMP-BDT500 Operating Instructions Manual page 12

DIGITAL AUDIO OUT (OPTICAL or COAXIAL)
≥ Set "HDMI Audio Output" to "Off" (
≥ Set "Digital Audio Output" (
5.1/7.1ch AUDIO OUT
Cable connections
A Front speaker (L/R)
B Surround speaker (L/R)
C Centre speaker
D Subwoofer
E Surround back speaker (L/R)
(Only for 7.1ch AUDIO OUT)
≥ Set "Analog Audio Output" to "7.1ch" or "2ch (Downmix) + 5.1ch", depending on the used terminal
( 32).
≥ You can set the "Analog Audio Output" from the "Easy Setting" (
≥ When connecting equipment with HDMI AV OUT terminal, set "HDMI Audio Output" to "Off" (
12
VQT3W07
Optical digital cable
OR
Coaxial cable
31).
31).
OPTICAL IN
COAXIAL IN
Amplifier/receiver
Connect Audio
cables to terminals
corresponding to
the speakers you
have connected.
Amplifier/receiver
14).
31).