Panasonic Viera TX-P42ST30E Operating Instructions Manual page 77

■
[WPS(Push button)]
WPS(Push button)
1) Please press the 'WPS' button on the access
point until its light flashes.
2) When the light is flashing select 'Connect' on
TV.
If you are unsure, please check the instruction
manual of the access point.
Connect
■
[WPS(PIN)]
1
Select your desired access point
Available Access Points
No. Wireless type
SSID
1 Access Point A 11n(2.4GHz)
2 Access Point B 11n(5GHz)
3 Access Point C 11n(5GHz)
•
To search access points again
(yellow)
2
Enter the PIN code to the access point, and then select [Connect]
WPS(PIN)
Please register the following PIN codes on the
access point.
PIN code : 12345678
Select 'Connect' after entering and saving the
settings on the access point.
Connect
■
[Search for access point]
Access points found automatically are listed.
1
Select your desired access point
Available Access Points
No. SSID Wireless type
1 Access Point A 11n(2.4GHz)
2 Access Point B 11n(5GHz)
3 Access Point C 11n(5GHz)
•
To search access points again
(yellow)
press the WPS button on the access point until the light flashes
•
Ensure that your access point supports WPS for this setup.
•
WPS : Wi-Fi Protected Setup™
Encrypt Reception
•
Ensure that your access point supports WPS for this setup.
•
For the information of the highlighted access point
Encrypt Reception
: Encrypted access point
•
For the information of the highlighted
access point
connect the Wireless LAN Adaptor and the access point
select
access
select
access
•
To set manually
(red)
•
To set manually
(red)
77