Table of Contents
Advertisement
Q- -LINK
Q- -Link allows the television to communicate with your VCR
Open the Setup menu
Move to Q--Link
Confirm Q--Link is set to "On"
Press the TV/AV button to exit
The VCR must be connected with a SCART lead (full function type) attached between the AV2
socket of the television and the appropriate socket on your VCR. See the VCR handbook for further
information. Q--Link,
VCR to record the programme that is currently being displayed on screen, regardless of the
programme position set on the VCR, thus simplifying the process of recording programmes.
To record the programme you are currently watching
Press the DIRECT TV REC button on the remote control
If the VCR is off, it will automatically switch on when you press the DIRECT TV REC button.
A message, sent from the VCR, will appear on screen showing what is being recorded, or if it is not
possible to record:
VCR recording preset prog
VCR recording own tuner
VCR is recording the programme signal
from its own tuner. If you wish you can
switch off the TV and leave the VCR
recording in the normal way.
Examples of other messages that might be displayed are:
No recording - NO TAPE
No recording - VCR IS PLAYING
VCR Recording VCR external
22
SET UP
or similar technology allows the television to instruct a compatible
NEXTVIEWLINK
Setup menu
AV2 out
Teletext
Off timer
Flicker reduction On
Q-Link
Text language
Tuning menu
TV/AV
OSD language
Geomagnetic
VCR recording TV source
VCR is recording the programme signal from the
You must not change programme position or
switch off the TV: if you do, the VCR will
automatically stop recording and switch off.
No recording - TAPE IS PROTECTED
The write protection tab on the back of the
cassette has been removed.
No recording - ALREADY RECORDING!
No recording - TAPE MAY BE DAMAGED
No recording - NO SOURCE AVAILABLE
TV
List
Off
On
West
DIRECT
TV REC
television.
Advertisement
Table of Contents
