Table of Contents
Advertisement
Play menu—Change the play sequence
This function works only when the elapsed play time is displayed.
Select the item for repeat play. Depending on the disc, the items that
can be selected will differ.
Repeat Play
[HDD] [BD-RE] [BD-R] [BD-V] [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL]
[+RW] [DVD-V] [-RW‹VR›] [CD] [USB] [AVCHD]
Items displayed depends on the contents of the playback.
≥All
≥Playlist
≥Title
≥Track
≥Chapter
Select "Off" to cancel.
Random (Only when playing music)
[HDD] [-R] [-R]DL] [CD] [USB]
While playing, press [3, 4] to select "On".
Picture menu—Change the picture quality
Mode
[HDD] [BD-RE] [BD-R] [BD-V] [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
[DVD-V] [-RW‹VR›] [AVCHD]
Select the picture quality mode during play.
≥Normal:
Default setting
Soft picture with fewer video artifacts
≥Soft:
Details are sharper
≥Fine:
≥Cinema:
Mellows movies, enhances detail in dark
scenes. (This does not affect the titles in DR
mode.)
HD optimizer
[HDD] [BD-RE] [BD-R] [BD-V] [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
[DVD-V] [-RW‹VR›] [AVCHD] and DivX
It will compensate the mosaic noise in the video and haze
around the characters precisely.
Progressive
§
Select the method of conversion for progressive output to suit
the type of title being played (
≥Auto:
Automatically detects the film and video
content, and appropriately converts it.
Select when using "Auto", and the content is
≥Video:
distorted.
Select this if the edges of
≥Film:
the film content appear
jagged or rough when
"Auto" is selected.
However, if the video
content is distorted as
shown in the illustration
to the right, then select "Auto".
It will work in following conditions.
§
– When "HDMI Video Mode" in the Setup menu is "Off" (
"Component Resolution" in the Setup menu is "576p/480p"
(
91)
– When "HDMI Video Mode" in the Setup menu is "Off" (
playing [DVD-V]
114, Film and video).
90) and
90) and
Sound menu—Change the sound effect
Sound Effects
[HDD] [BD-RE] [BD-R] [BD-V] [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL]
[+RW] [DVD-V] [-RW‹VR›] [CD] [USB] [AVCHD]
≥Re-master1
≥Re-master2
(Discs record at 48 kHz or less)
This feature gives you a more natural sound by adding higher
frequency signals not recorded on the track.
≥V.Surround1
≥V.Surround2
(2-channel or over only)
Enjoy a surround-like effect if you are using two front speakers
only.
– Turn V.Surround off if it causes distortion. (Check the
surround function on the connected equipment.)
– V.Surround does not work for bilingual recordings.
≥This function is effective for audio from the HDMI terminal or
the DIGITAL AUDIO OUT terminal only when "Digital Audio
Output" is set to "PCM". (However, in this case, audio is
output as 2ch from the DIGITAL AUDIO OUT terminal.)
Dialogue Enhancer
[HDD] [BD-RE] [BD-R] [BD-V] [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL]
[+RW] [DVD-V] [-RW‹VR›] [AVCHD] and DivX
(3-channel or over only, including a centre channel)
The volume of the centre channel is raised to make dialogue
easier to hear.
RQT9132
79
Advertisement
Table of Contents
