Sleep Timer; Date And Time - Philips Streamium NP3500/12 User Manual

Note
•
The alarm sounds even if you have switched NP3500
to active standby or Eco standby.
•
The buzzer sounds instead, if NP3500 fails to
connect to a music library or an Internet radio
station.
•
NP3500 is unmuted if it has been muted.
•
The alarm sounds in a higher volume if the volume
level is lower than minimum.
To snooze the alarm
• Press any button on the unit or
the remote control (except for the
volume buttons).
»
The alarm sounds again 15
minutes later. The alarm icon
remains.
To stop the alarm
• Press and hold
»
The alarm is stopped.
»
The alarm sounds again next day.
To turn off the alarm
• Go to [Settings] > [Clock settings]
> [Alarm]. Select [Alarm off] and
press OK on the remote control.

Sleep timer

With the sleep timer, you can have NP3500
turned off automatically after the set timer
duration.
To set the time duration
1
From the home screen, go to [Settings] >
[Clock settings] > [Sleep timer].
• Or, press SETTINGS on the remote
control to enter [Settings].
2
Select an option. Press OK to turn it on.

Date and time

The date and time can be set automatically or
manually.
Automatic setting
For automatic clock setting, use the online
service over the Internet.
34 EN
or .
Through the online service over the Internet
1
Turn on the unit, if necessary.
• Ensure that the unit is connected to
the home Wi-Fi/wired network and
Internet.
2
From Home screen, select [Settings] >
[Clock settings] > [Date and time].
• Or, press SETTINGS on the remote
control to enter [Settings].
3
In [Date and time], select [Current date
and time] > [Automatic (Internet)].
»
The unit starts auto time setting over
the Internet.
»
A message appears when the setting
is done.
Automatic (Internet)
Manual
Tip
•
According to the location and time zone you select,
the unit can have the clock time set and adjusted
automatically through the online service over the
Internet.
•
To check and change current location and time zone,
go to [Settings] > [Location and time zone].
Manual setting
1
Turn on the unit, if necessary.
2
From Home screen, select [Settings] >
[Clock settings] >[Date and time].
• Or, press SETTINGSon the remote
control to enter [Settings].
1/3