Device information Environmental notices Check for software upgrades Demo mode Your NP3500 Restore factory settings Introduction What’s in the box Register NP3500 with Philips Overview Benefits Register NP3500 Prepare Unregister NP3500 Install batteries into the remote control Check registration information...
i Only use this product indoors. Do 1 Important not expose the product to dripping / splashing water, rain or high humidity. j Keep this product away from direct Safety sunlight, naked flames or heat. k Do not install near any heat sources Information for Europe: such as radiators, heat registers, stoves, Know these safety symbols...
Please act according to your local rules and Environmental notices do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health. This product complies with the radio interference requirements of the European Community.
2 Your NP3500 What’s in the box Check and identify the contents of your Congratulations on your purchase, and package: welcome to Philips! To fully benefit from • Main unit the support that Philips offers, register your • Remote control with batteries product at www.philips.com/welcome.
Overview Front and rear view AUX IN (L/R) Analog audio input socket for an Press to turn on the unit. external audio output device. To turn off, press to switch to active standby; or, press and hold DC IN to switch to Eco standby. Socket for the AC power adapter Exit Demo mode.
Remote control Press to turn on the unit; To turn off, press to switch to active standby; or, press and hold to switch to Eco standby. Exit Demo mode. SETTINGS Enter the settings menus. Source selector Select a media source (DOCKING is unavailable for this unit): INTERNET RADIO: Radio...
Page 9
SOUND MENU Confirm selection. Enter the menu for sound effect adjustment. SNOOZE Search buttons on the play screen Stop alarm sound for a period of time. In LIBRARY mode: Press to skip to the previous/next SLEEP chapter/track. Set the sleep timer. REPEAT Start/pause/resume play;...
Home screen Play screen In LIBRARY/INTERNET RADIO/ONLINE SERVICES mode, Play screen appears when play starts. On NP3500, you enter Home screen after the first-time setup is complete. From Home screen, you can select your desired music source*, or enter [Settings] menu.
Page 11
• To enter symbols, press repeatedly. • To enter space, press • To switch between lower and upper cases, press • To delete previous character, press To delete all entries, press and hold • For languages other than English, letters that an alphanumeric button corresponds to may vary.
3 Prepare • Connect a pair of audio cables (red/white; not supplied) to: • LINE OUT L/R sockets on the back of this unit Install batteries into the • the audio input sockets on the existing audio system remote control If a digital audio input socket is available on the existing audio Caution...
4 First-time setup Connect power supply Warning The first time you turn on NP3500, • Risk of product damage! Ensure that the power Select the desired language on the screen supply voltage corresponds to the voltage printed on as prompted. the back or the underside of the product.
Connect to home Wi-Fi/ wired network Connect wirelessly TwonkyMedia Server (PC/Mac) NP3500 Connect through an Ethernet cable NP3500 TwonkyMedia Server (PC/Mac) or manual), or switch between different You can connect NP3500 to home Wi-Fi/ routers, go to [Settings] > [Network wired network in different ways: wireless or settings] >...
Page 15
Wireless connection: One-touch Wi- Fi Protected Setup (WPS) NP3500 supports Wi-Fi Protected Setup(WPS). You can quickly and securely connect NP3500 to a wireless router that also supports the WPS. You can select one of the two setup methods: PBC (Push Button Configuration), or PIN (Personal Identification Number).
Page 16
Wireless connection: Enter encryption key manually Network A Network B Network C NP3500 Other ... • Before you start the network setup, have the encryption key to your router ready. Select the desired Wi-Fi network. As prompted, enter the encryption key to the network.
Page 17
• If you have hidden the SSID of the router (e.g. disable the SSID broadcasting), go to the end of the list of Wi-Fi network. Select [Other...] > [Manual SSID entry]. In the text box, enter the name of the router. Acquiring IP address...
Page 18
12V=1A To Modem LAN4 LAN3 LAN2 LAN1 Reset • Press repeatedly to select the entry Connect to the home Wi-Fi/wired network location; • On the unit, select [Wired (Ethernet)]. • To enter the desired digits, use the » The unit starts to acquire an IP alphanumeric buttons on the remote address assigned by the network control;...
Page 19
Connect to the Internet • Connect to the Internet as prompted. » You enter Home screen after the first-time setup is complete. NP3500 Acquiring IP address... Press <Back> to enter IP address manually Internet Note • Ensure that the router connects to the Internet directly and no dial-up is required on the computer.
Page 20
• Press repeatedly to select the entry location; • To enter the desired digits, use the alphanumeric buttons on the remote control; or press repeatedly. Note • Ensure that you never enter an IP address that is already assigned to a computer/device on the network.
5 Play from home Wi-Fi/wired network Stream from a UPnP server TwonkyMedia Server (PC/Mac) NP3500 Wireless Modem PC Power You can stream music between computers UPnP client device (e.g. NP3500). On the and NP3500, when UPnP client device, you can play the music •...
Page 22
• Or, press FAVORITE when listening Stream from a UPnP server to a song. • A list of favorite songs is created On NP3500, play a music library that is streamed from a UPnP server (a computer on under [Media Library] > [Favorites]. the home Wi-Fi/wired network).
External control from a PC Play Internet radio stations Through the home Wi-Fi/wired network, the Media Browser on a PC (UPnP server) allows To play Internet radio stations, ensure that you to control NP3500. • NP3500 is connected to the Internet On the PC desktop, launch Media over the home Wi-Fi/wired network.
To play a preset station Store preset stations • Go to [Internet Radio] > [Presets]. • Or, on the radio play screen, press On NP3500, you can store up to 10 preset stations. Each preset station corresponds to the corresponding numeric button (0-9).
Page 25
Internet http://www.philips.com/welcome By registering NP3500 on www.philips.com/ welcome (see ‘Register NP3500 with Philips’), you can log in to Club Philips. On Club Philips, you can do the following to manage the Internet Radio on a computer: • Edit favorite stations;...
Page 26
Manually add stations Through Club Philips, you can manually add Internet radio stations to NP3500 on a computer. To change the order of favorite stations in On a computer, log in to Club Philips (see the list: ‘Register NP3500 with Philips’). •...
In [Music], enter station information in Stream from online music the text boxes: services • In [URL], fill in the web site of the station; On NP3500, you can enjoy the online music • In [Nickname], fill in a name that services.
Page 28
Note • Alphanumeric search, Superscroll and Quickjump are available only when you enter a long sorted list of options (excluding the home screen and lists of menus). Alphanumeric search To reach the first item that starts with the In a long list of options, start alphanumeric next letter search by entering characters that an item •...
(App Store). This application is free. Tap the App Store (App Store) icon on your iPhone. Use the virtual remote Search for ‘Philips MyRemote’ in the App control Store (App Store). Follow the instructions on your iPhone to Launch the application on your iPhone.
7 Multiroom Music NP3500 MCi8080 With the Multiroom Music feature, you can Wait until the Multiroom Music feature is play the same song on MCi8080 and NP3500 enabled successfully. at the same time. • To cancel simultaneous play, press Before you enable this feature, make sure that: MCi8080.
8 Settings Bass and treble Use [Bass / Treble] to adjust the low (bass) or high (treble) range of musical notes. Play modes From Home screen, go to [Settings] > [Sound settings] > [Bass / Treble]. When playing music, you can choose to play •...
Display settings Slideshow settings When in the slideshow mode, you can view Brightness pictures one by one. On NP3500, you can adjust the brightness of To select a play mode for slideshow the display. As desired, the display lights up, From the home screen, go to [Settings] >...
Clock settings Alarm Set the alarm Ensure that you have set the clock (see ‘Settings’->’Date and time’). From Home screen, go to [Settings] > [Clock settings] >[Alarm]. • Or, press SETTINGS on the remote control to enter [Settings]. To set the source of alarm sound, »...
Through the online service over the Internet Note Turn on the unit, if necessary. • The alarm sounds even if you have switched NP3500 • Ensure that the unit is connected to to active standby or Eco standby. the home Wi-Fi/wired network and •...
In [Date and time], select [Current date Device name and time] > [Manual]. In [Device name], you can name/rename your To enter date and time, NP3500. On a connected UPnP server/client, • Press to select the entry the NP3500 can be found as named. location;...
Go to [Settings] > [Restore factory settings]. Register on the web site As prompted, select [Yes]. To register NP3500 directly on www.philips. » The unit is turned off. com/welcome, you need to fill in the following »...
Look at the packaging box of the • device or the product label. You can To log in to Philips online services later, use the web site link in the email, and the password. always find the model number on the packaging box or product label (e.g.
10 Maintenance 11 Technical data This chapter tells you how to care for General NP3500. AC Power The voltage information is printed on the power adaptor (backside). Cleaning DC Power 5 V / 1 A (center pin positive) Note Dimensions (L x W x H) 222 x 80.5 x 114.5 mm •...
Page 39
Direct source (flat mode) Napster Direct** (for /12, /05, only in Yes (on / off) Germany/UK) Wireless * This service requires registration with Philips Club. Wireless standard ** Both services require user registration with 802.11n, backwards compatible to 802.11b/g Rhapsody and Napster respectively.
50-100m. Reposition the devices if you experience transmission problems. Others I have not received any registration email UPnP from ConsumerCare@Philips.com. DMP (Local renderer, Local control point) • Check that the email address that is ECP (Controllable via an external control...
Page 42
Limitations on Access to Streams. Philips does not guarantee access to any particular stream or to the content contained in any stream. Philips may, in its discretion, add or remove access to any specific stream or content at any time. Some streams are accessible through arrangements with online service providers which determine which streams are listed on their directories.
Page 43
Most of that software is contained in the Device and is not accessible to you. Some of that software is owned by Philips and some is owned by others. Your use of software owned by Philips is subject to these Terms and Conditions of Use and any applicable license agreement.
Page 44
Software, but you do not acquire any rights, express or implied, in the Software other than those specified in this Agreement. Philips and its licensors retain all right, title, and interest in and to the Software, including all patents, copyrights, trade secrets, and other intellectual property rights incorporated therein. The Software is protected by copyright laws, international treaty provisions, and other intellectual property laws.
Page 45
6. Termination. This Agreement shall be effective upon installation or first use of the Software and shall terminate (i) at the discretion of Philips, due to your failure to comply with any term of this Agreement; or (ii) upon destruction of all copies of the Software and related materials provided to you by Philips hereunder.
Page 46
Philips with a copy of your receipt. This limited warranty shall be void if failure of the Software has resulted from any accident, abuse, misuse or wrongful application. Any replacement Software will be warranted for the remainder of the original warranty period or thirty (30) days, whichever is longer.