System Settings - Philips DVDR3480 User Manual

Setup Menu Options

System settings

Menu Language
Clock Setting
Screen Saver
Restore Default
50
dvdr3480-05n31_eng_27232a.indd 50 dvdr3480-05n31_eng_27232a.indd 50
(continued)
(underlined options are the factory default settings)
Select the on-screen menu language for this recorder for
on-screen display.
Set the date and time. Use
use keys to select different entry fi eld, then press OK to
confi rm.
{ Manual }
{ Auto }
Notes:
–
Automatic time date download occurs only when the recorder is
switched on or in standby mode.
–
During the update in standby mode, the recorder behaves as follows:
1) The message on the front panel display switches from the current
time to 'HELLO'.
2) Once updating completes, the recorder switches back to standby
and the current time is displayed.
The screen saver prevents damage to the TV screen by avoiding
exposure to a static image for too long.
{ On }
{ Off }
Restore all the settings of this recorder, except for any timer
programming preset.
1) Press OK to confi rm the default restore.
2) A warning message will appear. Select { OK } in the menu to
proceed or { Cancel } to abort, then press OK to confi rm.
After restoring to factory default settings, you will be
prompted for the initial setup.
keys to change the number and
– Select this to manually set the date and
time.
– Turn on or off the automatic setting of
date and time. If enabled, the date and
time will be set according to the fi rst
preset channel that broadcasts this
information.
– Switch to TV screen saver mode when
playback has been stopped or paused for
more than 5 minutes.
– Turn off the screen saver function.
2007-11-02 11:52:06 AM 2007-11-02 11:52:06 AM