Playing Back And Deleting Images; Playing Back Images; Switching Between A Mode And Q Mode; Playing Back Still Pictures - Pentax OPTIO L50 Operating Manual

Playing Back and Deleting Images

Playing Back Images

Switching Between A Mode and Q Mode

In this manual, the capture mode, such as for taking still pictures, is
referred to as [A mode]. The playback mode, such as for displaying
captured images on the display, is referred to as [Q mode]. In Q
mode, you can perform simple editing operations on the images that are
played back.
Follow the procedure below to switch between A mode and Q mode.
To Switch from A Mode to Q Mode
1
Press the Q button.
The camera switches to
To Switch from Q Mode to A Mode
1
Press the Q button or shutter release button halfway.
The camera switches to
Displaying data in the built-in memory
When an SD Memory Card is inserted in the camera, images, movies,
and sounds in the SD Memory Card are displayed. If you want to
display images, movies, and sounds in the built-in memory, remove the
SD Memory Card.
[Viewing images in the built-in memory while the SD Memory Card is
inserted (built-in memory display)]
• When switching from A mode to Q mode, you can display images,
movies, and sounds in the built-in memory while the SD Memory Card is
inserted by pressing the Q button for more than one second.
• In built-in memory display, you can play back still pictures (including enlarged
display) (p.42, p.118), movies (p.125), and sounds (p.159), and switch between
nine-image display, folder display, and calendar display (p.117).
• In built-in memory display, you cannot delete data, delete a selection,
display the Playback Mode Palette, or display the menu. If you want to
perform any of these operations on images, movies, or sounds in the built-
in memory, do so after removing the SD Memory Card.

Playing Back Still Pictures

Refer to "Playing Back Images" (p.42) for instructions.
Q mode.
A mode.
5
115