Configuring Picture Options - Samsung LA26A450 User Manual

Configuring Picture Options
Activating Picture Options
1.
Press the MENU button to display the menu.
Press the ENTER
2.
Press the � or ▼� button to select "Picture Options", then press the
ENTER button.
Press the � or ▼� button to select a particular item. Press the ENTER
➣
button.
When you are satisfie�� with your setting, press the ENTER
➣
In PC mode, you can only make changes to the "Colour Tone" and "Size"
➣
from among the items in "Picture Options".
Colour Tone: Cool/Cool/Normal/Warm/Warm

You can select the most comfortable colour tone to your eyes.
The adjusted values are stored according to the selected "Picture" mode.
➣
"Warm1" or "Warm2" is only activated when the picture mode is "Movie".
➣
Size: 6:/Wide Zoom/Zoom/:/just Scan

You can select the picture size which best corresponds to your viewing
requirements.
• 6:: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
• Wide Zoom: Magnify the size of the picture more than 4:3.
• Zoom: Magnifies the 16:9 wi��e picture (in the vertical ��irection) to fit the screen size.
• :: This is the default setting for a video movie or normal broadcasting.
• just Scan: Use the function to see the full image without any cutoff when HDMI (720p/1080i) or Component
(1080i) signals are input.
In PC Mode, only "16:9" and "4:3" mode can be adjusted.
➣
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
➣
Temporary image retention may occur when viewing a static image on the set for more than two hours.
➣
"Wi��e Zoom": Press the �� button to Select "Position", then press the ENTER
➣
to move the screen up/down. Then press the ENTER
"Zoom": Press the �� button to Select "Position", then press the ENTER
➣
move the picture up and down. Then press the ENTER
Press the �� button to Select "Size", then press the ENTER
or reduce the picture size in the vertical direction. Then press the ENTER
After selecting "just Scan" in HDMI (00i) or Component (00i) mode:
➣
Select "Position" by pressing the �� or ��button. Use the �, ▼�, �� or �� button to move the picture.
Reset: Press the �� or �� button to select "Reset", then press the ENTER
If you use the "Just Scan" function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the
➣
overscan function.
You can select these options by simply pressing the P.SIZE button on the
O
remote control.
Digital NR: Off/Low/Medium/High/Auto

If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help
reduce any static and ghosting that may appear on the screen.
When the signal is weak, select one of the other options until the best picture is displayed.
➣
DNIe: Off/Demo/On

This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you can view the screen
with the DNIe feature activated. If you set the DNIe to Demo, you can view the applied DNIe and normal pictures on
the screen, for demonstration purposes. Using this function, you can view the difference in the visual quality.
DNIe™ (Digital Natural Image engine) DNIe™
➣
This feature brings you more detailed image with 3D noise reduction, detail enhancement, contrast enhancement
and white enhancement. New image compensation Algorithm gives brighter, clearer, more detailed image to you.
DNIe™ technology will fit every signal into your eyes.
This function is not available in "Movie" and "Standard" mode.
➣
button to select "Picture".
button.
button.
button.
English - 6
Tint (G/R)
Detailed Settings
Picture Options
Picture Reset
Picture Options
Colour Tone : Normal
Size : 16:9
Digital NR : Auto
DNle : Off
HDMI Black Level : Normal
Blue Only Mode : Off
Move
button. Press the � or ▼� button
button. Press the � or ▼� button to
button. Press the � or ▼� button to magnify
button.
button. You can initialize the setting.
: G50/R50
►
��
Enter Return