Table of Contents
Advertisement
43 Camera Settings
Auto Power Off
The Auto Power Off setting allows you to adjust the length of time after
which the camera will power down when inactive. Use the Up/Down
navigation buttons to select from the menu options. Two options are
available:
•
5 MIN (default)
•
2 MIN
Video Out
The Video Out setting allows you to adjust the video output, depending on
the type of your TV. Use the Up/Down navigation buttons to select from
the menu options. Two options are available:
•
NTSC
•
PAL (default)
USB Mode
The USB Mode setting allows you to select the transfer method between
your camera and your PC. Two options are available:
•
PTP (PictBridge Print): When the camera is connected by a USB
cable to a printer which supports Pictbridge, it can directly print
images stored on the media. For details on PTP function, please
See "PictBridge Print (PTP)" on page 45.
•
MSDC (default): The camera is set up to act as a mass storage
device, allowing only for transfer of files between your camera and PC.
Date Stamp
The Date Stamp setting allows you to adjust the format in which the date
will appear on each photo or video. You can also deactivate this function if
you wish. Setting a date stamp allows for easy sorting and the date will
appear on the photo when printed. Press the OK button to confirm. Use the
Up/Down navigation buttons to select from the menu options. Four options
are available:
•
OFF (default)
•
YYYY MM DD: year-month-day format
The Setup Menu
•
MM DD YYYY: month-day-year format
•
DD MM YYYY: day-month-year format
5 MIN
2 MIN
AUTO POWER OFF
NTSC
PAL
VIDEO OUT
PTP
MSDC
USB MODE
OFF
YYYY MM DD
MM DD YYYY
DD MM YYYY
DATE STAMP
Hide quick links:
Advertisement
Table of Contents
