Basic Connection
Rear of the Display Unit
■
Attach the clamper
Identifying Controls
Insert the clamper
in a hole
Identifying Controls
Display Unit
Mains power On / Off switch
●
Turn the Display Unit On or Off.
When turning Off the Display Unit,
Tuner Box will also be turned to
Standby mode after 1 min.
Tuner Box
Standby switch
●
Turn the Tuner
Box on or off to
standby mode
Function select
●
Volume / Contrast / Brightness /
Colour / Sharpness /
Tint (NTSC mode) / Bass / Treble /
Balance / Auto Setup (p. 36, 38, 39)
14
Using the clamper
To remove from the TV:
hole
Keep
pushing both
side snaps
Remote control signal receiver
●
Do not place any objects between the TV remote control signal receiver and remote control.
Power LED
●
Standby: red
On: green
●
When using the remote control, indicates the TV has received a command.
Recording LED
●
Standby for Direct TV Recording: orange
Changes the input mode
Selects channel in sequence
●
Fix cables with clampers as necessary.
●
When using the optional accessory, follow the option's
assembly manual to fix cables.
■
Bundle the cables
snaps
hooks
Power LED
●
Standby: red
On: green
●
When using the remote control, indicates
the TV has received a command.
C.A.T.S. (Contrast Automatic Tracking System) sensor
●
Senses brightness to adjust picture quality when
"Eco Mode" in the Picture Menu is set to "On" (p. 30)
HDMI 4
SD Card slot
(p. 64)
HDMI4 terminal
(p. 76)
To loosen:
Set the
knob
tip in the
hooks
Selects channel in sequence
Volume Up / Down
AV3
S-V
V
L
R
AV3 terminals
PC terminal
(p. 76)
(p. 76)
Headphones jack
(p. 76)
Keep
pushing
the knob
PC AUDIO
via AV3
PC