Panasonic Viera TX-P42X50E Operating Instructions Manual page 8

Assembly screw (4)
(silver)
M5 × 18
Assembling the pedestal
Use the assembly screws
the base securely.
Make sure that the screws are securely tightened.
Forcing the assembly screws the wrong way will strip
the threads.
"L" or "R" mark is stamped on the bottom of the pole.
A
C -
C - R
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1 Remove the assembly screws
2 Pull out the pedestal from the TV.
3 Remove the assembly screws
Preventing the TV from falling over
Using the fall-prevent screw hole and a screw (commercially available), securely fix the body of the pedestal to the
installation surface.
The place where the pedestal is to be fixed should be thick enough and made of hard material.
8
Assembly screw (4)
(black)
M5 × 30
to fasten the poles
A
L
D
from the TV.
from the poles.
Pole (2)
R: TBL5ZA3311
L: TBL5ZA3310
R
L
Securing the TV
to Use the assembly screws
Tighten the four assembly screws loosely at first, then
tighten them firmly to fix securely.
Carry out the work on a horizontal and level surface.
Arrow mark
Screw (not supplied)
Diameter: 3 mm
Length: 25 - 30 mm
Screw hole
Base
TBL5ZX0343
(TX-P42X50E)
TBL5ZX0341
(TX-P50X50E)
to fasten securely.
B