Dialing Mode - Panasonic KX-TSC10FXW Operating Instructions Manual

Settings

Dialing Mode

You can select the dialing mode by programming. If you have touch tone
service, set to Tone. If rotary or pulse service is used, set to Pulse. Your
phone comes from the factory set to Tone.
Make sure that the handset is on the cradle.
1
Press [FUNCTION/EXIT].
2
Scroll to "SET DIAL MODE ?" by
pressing [ ] or [ ].
3
Press [ENTER].
4
Select "PULSE" or "TONE" by pressing
[ ] or [ ].
5
Press [ENTER].
• The display will return to step 2. To exit
the programming mode, press
[FUNCTION/EXIT] or wait for
60 seconds.
• You can exit the programming mode any time by pressing [FUNCTION/EXIT].
10
SAVE SPEED DIAL?
SET DIAL MODE ?
:TONE
STORED