Timer Programming (Dvb Mode) - Panasonic Viera TX-P55VT30E Operating Instructions Manual

Plasma television
Hide thumbs Also See for Viera TX-P55VT30E:
Table of Contents

Advertisement

Timer Programming (DVB mode)

Timer Programming is a timer to remind watching or record the programme to the external recorder, the USB HDD or the SD
Card.
1
Select the forthcoming programme
select
set
LED will turn to orange if
Timer Programming is set.
(Orange LED will flash if the recording of
Timer Programming is in progress.)
To check / change / cancel a timer
programming event
 "Timer Programming" (p. 60 - 62)
If you select the current programme
A confirmation screen asking whether you wish to watch or record the programme will appear.
Select [Timer Programming] and set [Ext Rec.], [USB HDD Rec.] or [SD Card Rec.] to record from the time you finish the timer
programming event setting.
Das Erste
19:30- 20:00
View
Timer Programming
Note
This function is not available in Analogue mode.
Timer Programming only works reliably if correct time information is received via the signal from the broadcaster or service
provider.
No other channel can be selected while the recording of Timer Programming is in progress.
When recording programmes to the external recorder, be sure to make the proper settings on the recorder connected to the
TV.
If a compatible recorder with Q-Link, VIERA Link or similar technologies is connected to the TV (p. 105, 106) and the [Link
Settings] (p. 45) are completed, no setting of the recorder is required. Also read the manual of the recorder.
When recording programmes to the USB HDD, be sure to format the USB HDD and enable it for recording in [Recording
Setup] (p. 75).
When recording programmes to the SD Card, prepare a new SD Card or the SD Card formatted with this TV. (p. 76)
For more information of the USB HDD / SD Card Recording.
2
Select the function ([Ext Rec.], [USB HDD Rec.], [SD Card Rec.] or
[Reminder])
(Timer Programming screen)
Timer Programming
Function
No. Channel Name
Ext Rec.
D
12
BBC ONE
<TIMER>
---
---
---
---
---
---
---
---
Select timer
Edit timer
EXIT
RETURN
[Ext Rec.] / [USB HDD Rec.] / [SD Card Rec.] :
to record the programme to the external recorder, the USB HDD or the SD Card
When the start time comes, the channel will be switched automatically and the
video and audio signals will be output. 2 minutes before the starting time, a
reminder message appears if you are watching TV.
For [USB HDD Rec.] / [SD Card Rec.], you can select a recording mode:
LED
[DR] : Direct recording (normal mode)
[LT1] : Long time recording
[LT2] : Extra long time recording
"Recording time for the USB HDD / SD Card Recording" (p. 119)
[Reminder] :
to remind you to watch the programme
When you are watching TV, a reminder message appears 2 minutes before the
start time. Press the OK button to switch to the programmed channel.
select
access
Wed 27.10.2010 10:46
Date
Start
End
Wed 27.10.2010
20:00
20:30
(30 min.)
--/--
--:--
--:--
(--- min.)
--/--
--:--
--:--
(--- min.)
--/--
--:--
--:--
(--- min.)
--/--
--:--
--:--
(--- min.)
Remaining Capacity:
0
9
1/1
32GB (80%)
500GB (50%)
To return to TV Guide
(p. 74, 118)
select
store
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents